This blue flame cabinet heater is equipped with a thermostat which allows you to maintain and control the desired room temperature. The easy push-button ignition makes it simple to start while the oxygen depletion sensor features an automatic shut-off design to keep your home safe.
This heater can be mounted to the wall or the floor with the included mounting brackets and hardware. No electricity is required which is perfect for keeping you warm during power outages. A great additional feature, this heater includes a pre-installed blower which helps spreads warm air throughout the room. The blower has two operating modes, thermostat and manual. In the thermostat setting, the blower will cycle on and off automatically as it senses heat from the heater. In the manual mode, you can choose from either on or off settings.The blower requires standard 120V household current but if the power goes out, your heater will still operate without the blower. This Product Is Proudly Assembled in the USA Using Parts Manufactured in the USA! Designed, Engineered, Assembled and Tested in the USA. Skilled American workers manufacture parts, assemble and test our products.
Only high-quality materials and parts are used in the manufacturing of our products. Our factory features state of the art manufacturing equipment. Product ships from our domestic warehouse in Kentucky, USA. Operates on Natural Gas Only. Heats Up To 1,400 Sq.Thermostat Control - The built-in thermostat automatically cycles the heater on and off to maintain your desired heat setting. Variable heat settings allow you to dial in your comfort level. Slim cabinet design takes up less room space. No outside duct or chimney needed!
Heat for only pennies an hour! (Oxygen Depletion Sensor) included with automatic shut-off. No electricity required to operate heater!
Push Button Piezo Ignition System. Includes wall mounting bracket to mount to a wall. Includes base feet to mount to the floor. Certified to ANSI standards for safe, clean-burning heat. Product Dimensions: 24.1" H x 25.5" W x 8.46 D. Product Weight: 24.5 lbs. Vent-Free Gas Space Heater Model Number B30TNB-BB. What's In the Box. Vent Free Heater - Qty.Wall Mounting Bracket - Qty. Hardware Pack - Qty 1. This Item Is Not for Sale To Residents In California. Check your local regulations before purchasing and installation. Please review state code acceptances for vent-free gas appliances.
Vent-Free heaters do not operate at elevations above 4,500 feet altitude. This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm.The item "Bluegrass Living Natural Gas VentFree Blue Flame Gas Heater With Blower and Feet" is in sale since Thursday, December 5, 2019. This item is in the category "Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Space Heaters".
The seller is "factorybuysdirect" and is located in Bowling Green, Kentucky. This item can be shipped to United States.